Determination of carbon and sulfur

When using conventional elemental analyzers for carbon and sulfur determination in solids, the user has to decide whether to use a resistance furnace to analyze organic compounds or an induction furnace for inorganic compounds. Now Eltra’s unique CS-2000 analyzer combines both techniques. Thus the user only needs one analyzer to examine organic matrices (such as fuels, oils, chemicals) and inorganic matrices for their carbon and sulfur content directly without cumbersome sample preparation. The ­analysis time of the CS-2000 is impressively short: analysis of steel, for example, only takes about 50 s, and for coal it is about 90 s. Carbon and sulfur are measured simultaneously with an accurate infrared detection system.
x

Related articles:

Issue 3/2018 ELTRA GMBH

Precise carbon/sulfur analysis with flexible measuring range

Elementrac CS-i

The new Elementrac CS-i was developed for accurate and reliable analysis of carbon and sulfur in inorganic materials like cement. It uses an induction furnace for sample combustion as well as highly...

more
Issue 7-8/2015 ELTRA

Combustion analyzers for TOC analysis of solid materials

The TOC (total organic carbon) content is an important parameter to characterize materials like soil, rocks or cement. It can be determined by controlled combustion at a fixed temperature, by...

more
Issue 8/2021 WUHAN UNIVERSITY OF SCIENCE AND TECHNOLOGY

Effect of raw material components on RDF pyrolysis gas products

1 Introduction China is a major producer of cement. With the increase of cement output year by year, the emission restriction conditions of pollutants such as NOx are becoming more and more strict [1,...

more
Issue 6/2021 US 2021/0187437 A1

Systems and methods for sequestering carbon dioxide and other pollutants

(22) 18.12.2020 (43) 24.06.2021 (57) Systems and methods for the effective sequestration of waste gases from an industrial process such as, but not limited to, one or more lime or cement kilns used in...

more
Issue 10/2010

Rugged level indicator for bulk solids

The main fields of application of the rotors, type MBA 2.2 and MBA 3.2, are to indicate if storage silos are full, empty or require material. More and more frequently the rugged electromechanical...

more