TSINGHUA UNIVERSITY BEIJING

Microstructure model of fresh cement paste in the presence of superplasticizer

The microstructure of fresh cement paste (FCP) in the presence of superplasticizer was investigated in this study. A Morphologi G3 microscope was applied to directly observe the microstructure of the FCP with the emphasis of the real organization structure of cement particles in the paste. Based on the microstructure characterization, the working mechanism of superplasticizer on the flowability of FCP was analyzed. Combined with the real microstructure of multi-sized cement particle suspension and the working mechanism of superplasticizer, the contents of different types of water in cement suspension and the volume fraction of solid phase were calculated. Finally, a generalized multi-scale microstructure model of FCPs at varied superplasticizer dosages and water to cement ratios was established, which was verified by the experimental results of yield stress of the FCPs.

1 Introduction

Flowability has been considered one of the important properties of fresh cement-based materials due to their essential roles in the construction process as well as their effects on the mechanical properties and durability of hardened ones. Basically speaking, the macroscopic flowability is primarily determined by the microstructure of the materials, e.g. the packing state and the contents of solid phase in the cementitious suspension systems etc. [1-3]. In the fresh cement paste (FCP), the agglomeration of cement particles immediately takes places upon the contact of cement to...

Related articles:

Issue 12/2017 BEIJING JIAOTONG UNIVERSITY I TSINGHUA UNIVERSITY BEIJING

Flowability and microstructure of fresh ­cement pastes in the presence of superplasticizer, latex and asphalt emulsion

1 Introduction High performance concrete (HPC) is widely used in the construction industry at present due to its excellent properties [1]. The improved properties of HPC are closely related to the...

more
Issue 7/2023

Study on mechanical strength and early hydration properties of cement paste modified by polycarboxylate superplasticizer with slump retention

1 Introduction Concrete and cement-based materials are the primary foundations for the capital construction of a country due to their widely used and large consumption [1]. High-performance concrete,...

more
Issue 1-2/2017 KAZAN STATE UNIVERSITY OF ARCHITECTURE AND ENGINEERING

Features of the microstructure and phase composition of hardened cement paste prepared by mechano-chemical activation of the binder

1 Introduction Binder activation is one of the most promising methods of developing the physical and mechanical properties of cement composites [1-6]. The best-known methods include: turbulent [7-9],...

more
Issue 4/2016 WUHAN UNIVERSITY OF TECHNOLOGY OFFICE OF REFORMATION OF WALL MATERIAL AND ENERGY-EFFICIENT BUILDING

Research on the interface and ­microstructure of thin layer mortar

1 Introduction Thin layer mortar has been mostly considered as a special mortar, which possesses high water-cement ratio and high area/volume ratio [1].The common problem of the thin layer mortar...

more
Issue 3/2023 US RE49 415 E

Particle packed cement-SCM blends

(22) 06.03.2019 (45) 14.02.2023 (57) Cement-SCM blends employ particle packing principles to increase particle packing density and reduce interstitial spacing between the cement and SCM particles....

more