SOLIDIA TECHNOLOGIES

Solidia gets contribution from DOE for utilization of CO2 in high-performance building and infrastructure products

The next phase of a four-year research and development project supporting the commercialization of Solidia Technologies’ carbon dioxide-reducing cement and concrete processes will commence with the commitment of an additional 752000 US$ from the US Department of Energy’s (DOE) National Energy Technology Laboratory (NETL).

The project entitled “Utilization of CO2 in High Performance Building and Infrastructure Products” is co-funded by NETL through its Carbon Storage Technology program, and by Solidia Technologies. The overall goal is to use an alternative to ordinary Portland cement (OPC) to produce a CO2-cured concrete. The alternative cement is a synthesized alkali-earth compound that can be fabricated from the same raw materials and in the same kilns as OPC, albeit with lower energy consumption and reduced CO2 emissions. The CO2-cured concrete, named Solidia ConcreteTM, offers improved mechanical properties and durability while allowing for the safe and effective storage of CO2 in construction materials.

Since its inception, the project has focused on the development and optimization of Solidia’s proprietary CO2-curing process. To date, the technology has evolved to the point where Solidia Concrete can be made using materials and equipment common to OPC-based concrete production. This achievement facilitates the quick adoption and broad use of Solidia Concrete across the entire precast concrete market and magnifies the ability of the program to reduce atmospheric CO2 levels.

The project will now focus on demonstrating these CO2 reduction and storage capabilities on a prototype scale in a commercial concrete plant. The new research objectives, designed to help advance the technology towards commercialization, include:

1. The demonstration of the basic performance of Solidia Cement produced at a commercial cement plant

2. The demonstration of the utility of this cement in at least six different precast concrete applications; and

3. The actual commercialization of concrete manufacturing using CO2-curing.

“Successful commercialization of Solidia Concrete technology would benefit national efforts to reduce carbon emissions,” said NETL Carbon Storage Technology Manager Traci Rodosta. “Using CO2 rather than emitting the greenhouse gas to the atmosphere is a win-win situation. This project illustrates the potential of the Solidia technology to reduce CO2 emission in the near term, as we continue investigating further solutions as part of the President’s ‘all of the above’ energy strategy.”

NETL supports Solidia Concrete technology because of its potential to consume CO2 as it cures, based on NETL’s mission to support the development of technologies that reduce or avoid man-made greenhouse gases emitted to the atmosphere.

“DOE’s National Energy Technology Laboratory continues to be an outstanding partner in the development and commercialization of Solidia Concrete. Their timely support has been instrumental in moving this sustainable manufacturing technology from the benchtop to the factory floor,” commented Solidia’s Chief Technology Officer, Dr. Nicholas DeCristofaro.

Additional third-party research and collaborative testing substantiates Solidia’s technology and product development. Lafarge, a world leader in building materials, is instrumental on research in concrete applications, and The Linde Group, a global leader in the international gases market, has extended its CO2 supply and delivery expertise to technology development and commercialization. The U.S. Department of Transportation’s Federal Highway Administration supports Solidia with a Cooperative Research and Development Agreement (CRADA) to examine transportation infrastructure applications at the Turner-FairbankHighway ResearchCenter.

Long-term research continues at Rutgers University, where the original generation of the technology was developed, and collaborative research efforts are underway in laboratories at Purdue University, Ohio University, and the University of South Florida. The strength and durability of Solidia Concrete has been verified according to ASTM and AASHTO specification by the CTLGroup, formerly the R&D laboratory of the Portland Cement Association.

//www.solidiatech.com" target="_blank" >www.solidiatech.com:www.solidiatech.com

x

Related articles:

Issue 12/2014 USA

Solidia gets further research funding

The next phase of a four-year research and development project supporting the commercialization of Solidia Technol-ogies’ carbon dioxide-reducing cement and concrete processes will commence with the...

more
Issue 11-12/2020 LAFARGEHOLCIM

LafargeHolcim expands carbon capture projects with government funding from the US and Germany

LafargeHolcim’s portfolio of carbon capture projects was recently reinforced as the United States Department of Energy’s National Energy Laboratory Technology (DOE-NETL) announced that it will...

more
Issue 7-8/2020 LAFARGEHOLCIM

LafargeHolcim ramps up partnership to capture CO2 in building materials 

LafargeHolcim ramps up its partnership with Solidia Technologies to reduce CO2 across its value chain. With this announcement the collaboration with the US-based cement and concrete technology...

more
Issue 2/2022 HTWK LEIPZIG UNIVERSITY OF APPLIED SCIENCES

Millions in funding for Leipzig carbon-reinforced concrete research

Carbon-reinforced concrete can make an essential contribution to climate-friendly construction, because in contrast to the steel bar and mesh reinforced concrete commonly used to date, the new...

more
Issue 11/2013

New partnership between Lafarge and Solidia Technologies

Lafarge has signed a partnership agreement with the Solidia Technologies®, Piscataway/USA, to industrialize an innovative technology that could reduce the environmental footprint of precast concrete....

more