Simplified method of feed pipe balancing at pneumatic reactor feed

When an industrial process/a reactor is to be pneumatically fed with a solid material via several, simultaneously supplied feed points, one of the requirements is uniform distribution of the solids mass flows. To enable a precise calculation of the individual flows and total flows, numerous parameters are required.


Related articles:

Issue 2013-11

Simplified method of feed pipe balancing at pneumatic reactor feed

1 Introduction Various industrial processes are supplied with solid material via parallel pneumatic conveying pipes from several injection points. Normally, it is required that the individual solid...

Issue 2015-11 WO 2015/128910 A1

Flux calciner

(22) 18.09.2015 (43) 03.09.2015 (57) Provided is a flux calciner that can perform adequate calcinations while preventing obstruction at a preheater by reducing the unburned rate at an outlet of the...


The Pneumo-Deflector

For the last two decades Unitherm Cemcon has implemented several tools in the burner to influence the distribution of solid recovered fuel (SRF) particles in the flame. For the total use of the...

Issue 2022-7 WO 2022/180326 A1

Calcination unit for decarbonating raw materials, and clinker production process

(22) 17.02.2022 (43) 01.09.2022 (57) Disclosed is a calcination unit (1) suitable for decarbonating raw materials intended for the production of clinker, the unit (1) comprising: – a main pipe (2) in...

Issue 2022-3 US 2022/0062814 A1

System and method for mixing recirculating combustion ash with hydrated lime and water

(22) 28.08.2020 (43) 03.03.2022 (57) A mixer for recirculating ash from solid fuel combustion with hydrated lime and water and to feed the mixture into a desulfurization reactor. The mixer includes a...