ARTICLE

Performance and mechanism of aluminum sulfate in the calcium hydroxide modified macro defect-free (MDF) gypsum

Macro-defect-free (MDF) gypsum exhibits considerable strength loss and susceptibility to water-induced degradation due to its porous microstructure and inherently weak crystal contact points. In this study, an inorganic modification approach utilizing calcium hydroxide (CH) and aluminum sulfate (Al2(SO4)3) was introduced. The results demonstrate that the synergistic application of CH and Al2(SO4)3 significantly improves the mechanical properties and water resistance of gypsum. Compared to pure gypsum, the incorporation of 3 wt% CH and 0.5 wt% Al2(SO4)3 leads to an increase in dry and wet compressive strength by 155.8% and 154.4%, respectively. Excessive Al2(SO4)3 content decreases the strength of CH-modified MDF gypsum. The addition of Al2(SO4)3 does not change the crystal structure, chemical composition, or morphology of CH-modified MDF gypsum but decreases its porosity. Molecular dynamics simulations demonstrate that a low content of Al3+ ions effectively reinforces the tensile strength of contact points, while a high content of Al3+ ions weakens them. Furthermore, Al3+ ions cause localized erosion of gypsum crystals. These findings provide a nanoscale design strategy for the development of high-strength and water-resistant gypsum-based materials.

1  Introduction

Gypsum is an environmentally friendly and reusable building material [1–3], that is widely used in wall materials [4, 5] and flame-resistant applications [6]. However, the compressive strength of gypsum experiences a significant decline when water molecules

...
References

1. Weimann K, Adam C, Buchert M, Sutter J. Environmental evaluation of gypsum plasterboard recycling. Minerals. 2021;11(2):101.

2. Zhu C, Zhang JX, Yi W, Cao WX, peng JH, Liu JS. Research on degradation mechanisms of recycled building gypsum. Constr Build Mater 2018;173:540–549.

3. Guedri A, Abdallah F, Mefteh N, Hamdi N, Baeza-Urrea O, Wagner J-F, et al. Addition of phosphogypsum to fire-resistant plaster panels: a physic–mechanical investigation. Inorganics. 2023;11(1):35. 10.3390/inorganics11010035.

4. Zhang YY, Yang JS, Cao XY. Effects of several retarders on setting time and strength of building gypsum. Constr Build Mater. 2020;240:117927.

5. Sultan MA. Review of the NRC Canada studies on fire resistance of walls: results, research gaps and design guidelines. Fire Technol. 2022;58(6):3405–3437. 10.1007/s10694-022-01312-4.

6. Ding X, Huang W, Li Y, Hu Z, Shan Z. Study on retarding feature and retardation mechanism of various retarding materials on gypsum as a construction material: a review. J Build Eng. 2023;72:106569. doi:10.1016/j.jobe.2023.106569.

7. Li J, Ma B, Zhang X, Lu X. Enhancement and mechanism of macro-defect free (MDF) gypsum water resistance achieved by hydrophobic modification. Case Stud Constr Mater. 2024:20:e02791. doi: 10.1016/j.cscm.2023.e02791.

8. Xu Q, Wang J, Wang Y, Lu B, Zhu Z, Zhu H, et al. Enhancement of strength and water resistance of macro-defect free (MDF) gypsum modified by pregelatinized starch and hydrogen silicone oil. J Build Eng. 2024;87(4):109008. doi:10.1016/j.jobe.2024.109008.

9. Lv M, Yang L, Wang F, Hu S, Zhong H, Zhang M, et al. Effect of gypsum on hydration properties, composition and kinetics of low carbon belite-ye’elimite-Q phase-ferrite clinker. Cem Concr Res. 2024;178:107466. doi:10.1016/j.cemconres.2024.107466.

10. Mbogoro MM, Peruffo M, Adobes-Vidal M, Field EL, O’Connell MA, Unwin PR. Quantitative 3D visualization of the growth of individual gypsum microcrystals: effect of Ca2+: SO42– ratio on kinetics and crystal morphology. J Phys Chem C. 2017;121(23):12726–34. doi:10.1021/acs.jpcc.7b01566.

11. Domanskaya I, Petropavlovskaya V, Novichenkova T, Petropavlovskii K, Fediuk R. Potential of gypsum-based matrices for sustainable composite materials: a comprehensive review. JOM. 2025;77(4):2367–82. doi:10.1007/s11837-025-07184-7.

12. Wu Q, Ma H, Chen Q, Gu B, Li S, Zhu H. Effect of silane modified styrene-acrylic emulsion on the waterproof properties of flue gas desulfurization gypsum. Constr Build Mater. 2019;197:506–12. doi:10.1016/j.conbuildmat.2018.11.185.

13. da Costa MCA, Porangaba MAO, Melo NMM, Ghislandi MG. Gypsum casting plaster reinforced with graphene oxide nanofillers. J Mater Civ Eng. 2025;37:04024441. doi:10.1061/jmcee7.mteng-18039.

14. Zhi Z, Guo Y, Wang L, Dong B, Jia T. Improvement of hydrophobic surface and mechanical properties of beta-hemihydrate desulfurization gypsum by graphene modification. ChemistrySelect. 2025;10(1):e202403379. doi:10.1002/slct.202403379.

15. Wang J, Xu Q, Qin J, Wu Q, Zhu H, Lu B, et al. Performance enhancement and mechanism of pregelatinized starch-binding gypsum at high water-gypsum ratios. Constr Build Mater. 2023;393(1):132142. doi:10.1016/j.conbuildmat.2023.132142.

16. Zhu Z, Wang J, Wu Q, Zhu H, Wang M, Yang T. Molecular dynamics simulation of water resistance enhancement of gypsum modified by polymethylhydrosiloxane (PMHS). Constr Build Mater. 2024;435(12):136801. doi:10.1016/j.conbuildmat.2024.136801.

17. Zhao Q, Da Y, He T, Shi C, Ke Y, Li S, et al. Effect of Na2SO4 and Na2CO3 on early performance of non-gypsum/low-gypsum cement: mechanism of synergistic activation with gypsum. Constr Build Mater. 2025;470:140554. doi:10.1016/j.conbuildmat.2025.140554.

18. Aquilano D, Bruno M, Ghignone S. Gypsum: from the equilibrium to the growth shapes—theory and experiments. Minerals. 2024;14(11):1175. doi:10.3390/min14111175.

19. Wang Y, Tang H, Su J, He H, Zhao Y, Wang J. Effect of sodium sulfate and gypsum on performances of expansive grouting material with aluminum as expansion agent. Constr Build Mater. 2023;394(2):132212. doi:10.1016/j.conbuildmat.2023.132212.

20. Zhang D, Zhang X, Tang H, Bai Y, Jia Z, Guo J, et al. Development of a novel type of liquid accelerator based on aluminum sulfate and its accelerating mechanism for cement hydration. J Mater Civ Eng. 2024;36:04023517. doi:10.1061/jmcee7.mteng-16404.

21. Lyu HJ, Yu J, Jeon D, Oh JE. Enhanced strength and accelerated setting of CaO—activated fly ash binders induced by aluminum sulfate hydrates for cementless brick production. J Build Eng. 2025;114:114308. doi:10.1016/j.jobe.2025.114308.

22. Cheng G, Hao J, Guo B, Hu T, Wang S. Effect of Al2(SO4)3 additive on the properties of calcined gypsum prepared from flue gas desulfurization. Mater Sci. 2024;30(1):106–13. doi:10.5755/j02.ms.34396.

24. Guan QJ, Sun W, Guan CP, Yu WJ, Zhu XN, Khoso SA, et al. Promotion of conversion activity of flue gas desulfurization gypsum into α-hemihydrate gypsum by calcination-hydration treatment. J Cent South Univ. 2019;26(12):3213–24. doi:10.1007/s11771-019-4247-8.

24. Fan H, Song X, Liu T, Xu Y, Yu J. Effect of Al3+ on crystal morphology and size of calcium sulfate hemihydrate: experimental and molecular dynamics simulation study. J Cryst Growth. 2018;495(8):29–36. doi:10.1016/j.jcrysgro.2018.05.013.

25. Gou J, Li S, Jiang C, Li Z, You G. A study on the influence of gypsum and Ca(OH)2 on the mechanical properties and hydration behavior of multi-component solid waste-based cementitious materials. Materials. 2025;18(9):1964. doi:10.3390/ma18091964.

26. Ul Rehman M, MacLeod A, Aldridge L, Collins F, Gates W. Enhancing cement replacement in calcined clay based blends using limestone and calcium hydroxide. J Build Eng. 2025;112:113913. doi:10.1016/j.jobe.2025.113913.

27. Finot E, Lesniewska E, Mutin JC, Goudonnet JP. Reactivity of gypsum faces according to the relative humidity by scanning force microscopy. Surf Sci. 1997;384(1–3):201–17. doi:10.1016/S0039-6028(97)00220-3.

28. Khalkhali M, Ma X, Zhang H, Liu Q. Bulk and surface properties of gypsum: a comparison between classical force fields and dispersion-corrected DFT calculations. Comput Mater Sci. 2019;16:8–16. doi:10.1016/j.commatsci.2019.03.045.

29. Jouanna P, Pèdesseau L, Pèpe G, Mainprice D. Mass and momentum interface equilibrium by molecular modeling. Simulating AFM adhesion between (120) gypsum faces in a saturated solution and consequences on gypsum cohesion. Cem Concr Res. 2008;38(3):290–9. doi:10.1016/j.cemconres.2007.09.022.

31. Wang P, Qiao G, Zhang Y, Hou D, Zhang J, Wang M, et al. Molecular dynamics simulation study on interfacial shear strength between calcium-silicate-hydrate and polymer fibers. Constr Build Mater. 2020;257:119557. doi:10.1016/j.conbuildmat.2020.119557.

31. Vidmer A, Sclauzero G, Pasquarello A. Infrared spectra of jennite and tobermorite from first-principles. Cem Concr Res. 2014;60:11–23. doi:10.1016/j.cemconres.2014.03.004.

32. Yang F, Cui Y, She A, Hai R, Zhu Z. Molecular dynamics simulation of silane inserted CSH nanostructure. Materials. 2023;17(1):149. doi:10.3390/ma17010149.

33. Fu J, Bernard F, Kamali-Bernard S. Assessment of the elastic properties of amorphous calcium silicates hydrates (I) and (II) structures by molecular dynamics simulation. Mol Simul. 2018;44(4):285–99. doi:10.1080/08927022.2017.1373191.

34. Liang G, Liu T, Li H, Wu K. Shrinkage mitigation, strength enhancement and microstructure improvement of alkali-activated slag/fly ash binders by ultrafine waste concrete powder. Compos Part B Eng. 2022;231:109570. doi:10.1016/j.compositesb.2021.109570.

35. Abdolhosseini Qomi MJ, Ulm FJ, Pellenq RJM. Evidence on the dual nature of aluminum in the calcium-silicate-hydrates based on atomistic simulations. J Am Ceram Soc. 2012;95(3):1128–37. doi:10.1111/j.1551-2916.2011.05058.x.

36. Wang Y, Mao X, Chen C, Wang W, Dang W. Effect of sulfuric acid concentration on morphology of calcium sulfate hemihydrate crystals. Mater Res Express. 2020;7(10):105501. doi:10.1088/2053-1591/abbc41.

37. He H, Dong F, He P, Xu L. Effect of glycerol on the preparation of phosphogypsum-based CaSO4·0.5H2O whiskers. J Mater Sci. 2014;49(5):1957–63. doi:10.1007/s10853-013-7825-4.

38. Ding Y, Hui Y, Zhang J, Ren Q, Huang K, Chen R, et al. Effect of different retarding agents on the hydration-crystallization process of β-hemihydrate gypsum. Mater Today Commun. 2025;47:113106. doi:10.1016/j.mtcomm.2025.113106.

39. Baquerizo LG, Matschei T, Scrivener KL. Impact of water activity on the stability of ettringite. Cem Concr Res. 2016;79(12):31–44. doi:10.1016/j.cemconres.2015.07.008.

40. Hui Y, Lin J, Ding Y, Ren Q, Chen R. Effect of aspartic acid on the hydration process and setting performance of hemihydrate gypsum under alkaline conditions. J Mater Res Technol. 2025;36:9629–40. doi:10.1016/j.jmrt.2025.05.161.

41. Xu Q, Wang J, She A, Wu Q, Zhu H, Lu B, et al. Performance and mechanism of amino acids (AAs) on the gypsum setting-time control. Constr Build Mater. 2024;411:134373. doi:10.1016/j.conbuildmat.2023.134373.

42. Cao T, Rolf J, Wang Z, Violet C, Elimelech M. Distinct impacts of natural organic matter and colloidal particles on gypsum crystallization. Water Res. 2022;218(4):118500. doi:10.1016/j.watres.2022.118500.

43. Borges PHR, Costa JO, Milestone NB, Lynsdale CJ, Streatfield RE. Carbonation of CH and C–S–H in composite cement pastes containing high amounts of BFS. Cem Concr Res. 2010;40(2):284–92. doi:10.1016/j.cemconres.2009.10.020.

44. Jansen D, Spies A, Neubauer J, Ectors D, Goetz-Neunhoeffer F. Studies on the early hydration of two modifications of ye’elimite with gypsum. Cem Concr Res. 2017;91:106–16. doi:10.1016/j.cemconres.2016.11.009.

45. Liu H, Sun Z, Yang J, Ji Y. A novel method for semi-quantitative analysis of hydration degree of cement by 1H low-field NMR. Cem Concr Res. 2021;141(2):106329. doi:10.1016/j.cemconres.2020.106329.

46. Liu C, Yu H, Li J, Yu X, Yu Z, Song Y, et al. Facile synthesis of hierarchical Ti3C2/Bi12O17Br2 Schottky heterojunction with photothermal effect for solar-driven antibiotics photodegradation. Acta Phys Chim Sin. 2025;41(7):100075. doi:10.1016/j.actphy.2025.100075.

47. Yang T, Zhu H, Zhang Z, Gao X, Zhang C, Wu Q. Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes. Cem Concr Res. 2018;109:198–207. doi:10.1016/j.cemconres.2018.04.008.

48. Liu C, Yu H, Xiao W, Gu C, Yu J, Li J, et al. Tuning interfacial charge transfer for efficient photodegradation of tetracycline hydrochloride over Ti3C2/Bi12O17Cl2 Schottky heterojunction and theoretical calculations. Appl Surf Sci. 2025;682:161717. doi:10.1016/j.apsusc.2024.161717.

49. Zhu Z, Dai Z, Wang J, Gu P, Yang T, Wang M. Preparation and mechanical properties evaluation of all-cement capacitor under cyclic charge-discharge conditions. J Indian Chem Soc. 2026;103:(6):102645. doi:10.1016/j.jics.2026.102645.

50. Gao X, Yang T, Li X, Zhu X, Zhu Z, Zhu H et al. Effects of U-phase formation on early-age autogenous shrinkage of one-part alkali-activated slag. Cem Concr Res. 2025;196:107938. doi:10.1016/j.cemconres.2025.107938.

Cite This Article

APA Style
Zhu, Z., Yang, T., Zhang, L., Yin, J., Wang, K. et al. (2026). Performance and mechanism of aluminum sulfate in the calcium hydroxide modified macro defect-free (MDF) gypsum. ZKG International, 79(7), 68–80. https://doi.org/10.32604/zkg.2026.076903
Vancouver Style
Zhu Z, Yang T, Zhang L, Yin J, Wang K, Song W. Performance and mechanism of aluminum sulfate in the calcium hydroxide modified macro defect-free (MDF) gypsum. ZKG Int.. 2026;79(7):68–80. https://doi.org/10.32604/zkg.2026.076903
IEEE Style
Z. Zhu, T. Yang, L. Zhang, J. Yin, K. Wang, and W. Song, “Performance and mechanism of aluminum sulfate in the calcium hydroxide modified macro defect-free (MDF) gypsum,” ZKG Int., vol. 79, no. 7, pp. 68–80, 2026. https://doi.org/10.32604/zkg.2026.076903

Related articles:

Issue 03/2025 EP 4 516 756 A1

Device for preparing limestone slurry and calcium hydroxide for laterite-nickel ore hydrometallurgy

(22) 30.06.2023(43) 05.03.2025(57) Disclosed is a limestone slurry and lime milk preparing device for hydrometallurgy of laterite nickel ore, which relates to the technical field of limestone slurry...

more
Issue 01/2025 US 12,168,214 B1

High reactivity lime hydrate and methods of manufacturing and uses thereof

(22) 04.04.2019(45) 17.12.2024(57) A sorbent composition with improved acid gas reactivity comprising calcium hydroxide particles is provided. In the calcium hydroxide composition, the amount of time...

more
Issue 8/2023 US 2023/0304166 A1

Chemical calcium hydroxide manufacturing for cement production using electrochemical separation devices

(22) 11.08.2021(43) 28.09.2023(57) An electrochemical method for producing calcium hydroxide includes dissolving a calcium precursor in a first solution in contact with a first electrode to produce...

more
Issue 4/2022 US 2022/0081311 A1

Sustainable calcium hydroxide production for green cement

(22) 24.08.2021(43) 17.03.2022(57) A method of making a composition of matter comprising calcium hydroxide. The method includes the steps of contacting a calcium-containing molecule with an aqueous...

more
Issue 3/2022 WO 2022/036923 A1

Technological process for changing physical and chemical properties of new phosphogypsum by using calcium hydroxide

(22) 02.12.2020(43) 24.02.2022(57) A technological process for changing physical and chemical properties of new phosphogypsum by using calcium hydroxide, relating to the technical field of new...

more
Issue 3/2022 WO 2022/036006 A1

Chemical calcium hydroxide manufacturing for cement production using electrochemical separation devices

(22) 11.08.2021(43) 17.02.2022(57) An electrochemical method for producing calcium hydroxide includes dissolving a calcium precursor in a first solution in contact with a first electrode to produce...

more
Issue 6/2021 US 2021/0179492 A1

Method for preparing an ettringite binder for producing construction materials

(22) 07.11.2018(43) 17.06.2021(57) A method for preparing an ettringite binder from an aluminosilicate source, a calcium sulfate source and a calcium hydroxide (or slaked lime, CH) source, the binder...

more
Issue 11/2017 US 2017/0182456 A1

Aqueous lime slurry, preparation process and uses

(22) 23.02.2017(43) 29.06.2017(57) Preparation of aqueous slurries of calcium dihydroxide. Preparation of aqueous suspensions of calcium hydroxide.(71) Coatex, Genay (FR)(73) Coatex, Genay (FR)

more
×