ARTICLE

Preparation and engineering application of super-retarding moist-mixed shotcrete materials for mining

The construction of shotcrete involves significant spatial-temporal properties, diversity, and complexity, with the scientific optimization of materials being key to addressing construction challenges. To address issues related to poor construction quality and inefficiency in mining shotcrete operations, this article develops a super-retarding moist-mixed shotcrete material with storage capabilities by incorporating fly ash (FA) as an auxiliary cementitious material, and integrating the benefits of polycarboxylate superplasticizers (PCEs) and sodium tripolyphosphate (STPP). The optimal mix ratio was determined through an orthogonal design experiment, and the material’s properties were thoroughly analyzed using a range of methods, including particle size measurement, hydration heat assessment, and mechanical performance testing. The results show that under the optimal mix ratio, the characteristic values of the particle size distribution curve are a uniformity coefficient (Cu) of 1.51 and a curvature coefficient (Cc) of 1.19. The hydration heat release values at 1 day and 3 days decrease by 44.5% and 41.4%, respectively. The slump is 181 mm, with initial and final setting times of 225 min and 476 min, respectively. The compressive strength after 1 day reaches 8.45 MPa, and the 28-day compressive strength increases to 25.63 MPa. Field comparison tests demonstrate the superior performance of this material in construction, and its water penetration resistance is also analyzed, further highlighting the broad application prospects of super-retarding moist-mixed shotcrete in engineering.

1  Introduction

Roadways are the fundamental components of underground mining systems, serving as both essential engineering structures and critical safety measures [1–3]. Shotcrete is one of the essential components in the modern standardized roadway excavation process. In China,

...
References

1. Xu L, Lu K, Pan Y, Qin Z. Study on rock burst characteristics of coal mine roadway in China. Energy Sources Part A Recovery Util Environ Eff. 2022;44(2):3016–35. doi:10.1080/15567036.2019.1655114.

2. Zhu D, Yu B, Wang D, Zhang Y. Fusion of finite element and machine learning methods to predict rock shear strength parameters. J Geophys Eng. 2024;21(4):1183–93. doi:10.1093/jge/gxae064.

3. Cheng J, Ma Z, Wang Z, Ke G, Si J, Qin Y, et al. Explosion wave pressure distributions and response characteristics of mine seal under the complex roadway pattern. Min Metall Explor. 2023;40(4):1171–86. doi:10.1007/s42461-023-00807-0.

4. Sjölander A, Hellgren R, Malm R, Ansell A. Verification of failure mechanisms and design philosophy for a bolt-anchored and fibre-reinforced shotcrete lining. Eng Fail Anal. 2020;116:104741. doi:10.1016/j.engfailanal.2020.104741.

5. Liu KY, Qiao CS, Tian SF. Design of tunnel shotcrete-bolting support based on a support vector machine. Int J Rock Mech Min Sci. 2004;41:768–73. doi:10.1016/j.ijrmms.2004.03.133.

6. Wei J, Rao J, Wang Y, Wang L. Mesoscopic characteristics of carbonate erosion to shotcrete. Case Stud Constr Mater. 2024;21(1):e03717. doi:10.1016/j.cscm.2024.e03717.

7. Shi D, Chen X, Guo Y, Feng L. In-depth understanding of the compressive failure mechanism in shotcrete–rock composites using non-destructive techniques and machine-learning algorithms. Rock Mech Rock Eng. 2026:1–23. doi:10.1007/s00603-026-05541-9.

8. Chen L, Li P, Liu G, Cheng W, Liu Z. Development of cement dust suppression technology during shotcrete in mine of China-a review. J Loss Prev Process Ind. 2018;55(6):232–42. doi:10.1016/j.jlp.2018.07.001.

9. Li R, Fang Y, Yao Z, Wang R, He J. Study on multi-physical field monitoring and signal release mechanism of shotcrete with different strengths for tensile-compressive failure process. Eng Fail Anal. 2026;192(4):110860. doi:10.1016/j.engfailanal.2026.110860.

10. Wang H, Zhang G, Shi X, Li X, He L, Jiang Z, et al. Experimental study on the impact fragmentation evolution and dust generation characteristics of the tunnel wet-mix shotcrete process. J Wind Eng Ind Aerodyn. 2026;277:106561. doi:10.1016/j.jweia.2026.106561.

11. Chen L, Ma G, Liu G, Liu Z. Effect of pumping and spraying processes on the rheological properties and air content of wet-mix shotcrete with various admixtures. Constr Build Mater. 2019;225(1):311–23. doi:10.1016/j.conbuildmat.2019.07.104.

12. Zhang J, Ma Q. Cubic compressive test and microstructure of moist-mixed materials with different water contents. Bull Chin Ceram Soc. 2013;32:2331–6. (In Chinese).

13. Kim D, Ma S. Development of moist-mixed Shotcrete I: basic Study. J Korean Soc Civ Eng. 2011;31:191–85.

14. Ma S, Kim D. Development of moist-mixed Shotcrete II: application Study. J Korean Soc Civ Eng. 2011;31:187–202.

15. Tan H, Zou F, Ma B, Liu M, Li X, Jian S. Effect of sodium tripolyphosphate on adsorbing behavior of polycarboxylate superplasticizer. Constr Build Mater. 2016;126(10):617–23. doi:10.1016/j.conbuildmat.2016.09.077.

16. Li FX, Chen YZ, Long SZ, Yu QJ. The retardation effect of super-retarding polycarboxylate-type superplasticizer on cement hydration. Arab J Sci Eng. 2013;38(3):571–7. doi:10.1007/s13369-012-0326-y.

17. Zhang L, Ji Y, Li J, Gao F, Huang G. Effect of retarders on the early hydration and mechanical properties of reactivated cementitious material. Constr Build Mater. 2019;212:192–201. doi:10.1016/j.conbuildmat.2019.03.323.

18. Chen FB, Li MY, Wang CL, Jiao HZ, Chen XM, Yang YX, et al. Solid waste-based super-retarded damp-shotcrete for low carbon and environmental protection. J Clean Prod. 2024;448(22):141588. doi:10.1016/j.jclepro.2024.141588.

19. Liu X, Wei L, Lu D, Sun L, Huang Y, Liu S. Bonding performance and construction parameters of low-rebound shotcrete. Eng Res Express. 2024;6(4):045416. doi:10.1088/2631-8695/ad87b0.

20. Qi H, Jia F. Optimization the shotcrete concrete with incorporation of fly ash and slag: a tunnel construction of China. In: Jeon HY, editor. Proceedings of the 2nd International Conference on Geosynthetics and Environmental Engineering. ICGEE 2024. Lecture Notes in Civil Engineering. Singapore: Springer; 2024. Vol. 396. p. 295–304.

21. Hwalla J, El-Hassan H, El-Mir A, Assaad JJ, El-Maaddawy T. Development of geopolymer and cement-based shotcrete mortar: impact of mix design parameters and spraying process. Constr Build Mater. 2024;449(28):138457. doi:10.1016/j.conbuildmat.2024.138457.

22. Du H, He J, Long Z, Feng J, Long G. Mechanical and transport properties of fly ash-shotcrete under simulated geothermal temperature: insights from hydration and microstructural evolution. Mater Today Commun. 2025;49(2):113779. doi:10.1016/j.mtcomm.2025.113779.

23. Hu Y, Yin S, Li K, Zhang B, Han B. Comprehensive utilization of solid waste resources: development of wet shotcrete for mines. Int J Miner Metall Mater. 2023;30(9):1692–704. doi:10.1007/s12613-022-2563-8.

24. Shi S, Sun E, Wang G. Representative volume element (RVE) size criteria for mesoscale homogenization of concrete with concave–convex aggregates, ITZ, and pores: applicability to thermo-mechanical property evaluation. J Build Eng. 2026;128(4):116533. doi:10.1016/j.jobe.2026.116533.

25. Yang JM, Kim JK, Yoo DY. Performance of shotcrete containing amorphous fibers for tunnel applications. Tunn Undergr Space Technol. 2017;64(4):85–94. doi:10.1016/j.tust.2017.01.012.

26. Cui Y. Influence and mechanism of coal gangue sand on the properties and microstructure of shotcrete mortar. Materials. 2025;18(9):1940. doi:10.3390/ma18091940.

27. Yan X, Liu LM, Zhang JP, Li YH, Wang H. Experimental study on basic mechanical properties of steel fiber-reinforced siliceous wet shotcrete. Adv Mater Sci Eng. 2018:1637261. doi:10.1155/2018/1637261.

28. Jiao H, Wang Q, Wu A, Liu X, He T, Wang H, et al. Mechanical properties and microstructure of ultra-retarded solidification mine tailings waste-based shotcrete. Case Stud Constr Mater. 2025;22(22):e04630. doi:10.1016/j.cscm.2025.e04630.

29. Li F, Cheng Y, Wu F, Su C, Li G. Compressive test characteristics and constitutive relationship of wet polypropylene macrofiber-reinforced shotcrete. Shock Vibr. 2021;2021:6649283. doi:10.1155/2021/6649283.

30. Chen L, Ma H, Sun Z, Zhang Y. Flowability of multi-sized mixed particles based on shotcrete aggregates. Powder Technol. 2022;408:117760. doi:10.1016/j.powtec.2022.117760.

31. Cheng YH, Yang SH, Zhang JY, Sun XH. Test research on hydration process of cement-iron tailings powder composite cementitious materials. Powder Technol. 2022;399:117215. doi:10.1016/j.powtec.2022.117215.

32. Demidova-Buizinene I, Pundienë I. Study of the effect of composite deflocculant on changes in physical and mechanical properties of heat-resistant concrete during heat treatment. Refract Ind Ceram. 2015;55(5):480–6. doi:10.1007/s11148-015-9748-x.

33. Xu Y, He T, Ma X, Luo R. The influence of calcium sulphoaluminate cement on the hydration process of cement paste mixed with alkali free liquid accelerator. Mater Today Commun. 2022;33(1):104622. doi:10.1016/j.mtcomm.2022.104622.

Cite This Article

APA Style
Han, Z., Ding, C., Ma, K., Liu, J., Wang, M. et al. (2026). Preparation and engineering application of super-retarding moist-mixed shotcrete materials for mining. ZKG International, 79(7), 107–121. https://doi.org/10.32604/zkg.2026.085348
Vancouver Style
Han Z, Ding C, Ma K, Liu J, Wang M, Huang W et al. Preparation and engineering application of super-retarding moist-mixed shotcrete materials for mining. ZKG Int.. 2026;79(7):107–121. https://doi.org/10.32604/zkg.2026.085348
IEEE Style
Z. Han et al., “Preparation and engineering application of super-retarding moist-mixed shotcrete materials for mining,” ZKG Int., vol. 79, no. 7, pp. 107–121, 2026. https://doi.org/10.32604/zkg.2026.085348

Related articles:

Issue 04/2026 GERMAN LIME ASSOCIATION (BUNDESVERBAND DER DEUTSCHEN KALKINDUSTRIE E.V., BVK)

Lime industry calls for faster approval procedures for domestic raw material extraction

The German Lime Association (Bundesverband der Deutschen Kalkindustrie e.V., BVK) is calling for a fundamental modernization and acceleration of planning and approval procedures for domestic limestonemining. Increasing delays in permitting processes are putting investments, security of supply, and ...

more
Issue 02/2026 HALLET GROUP

Unique green cement project by Australia’s Hallet Group

Photo: RMC trucks at a construction side (Credit by Hallet Group)The Government of South Australia will provide an AUD12M loan to the Hallett Group to back a unique green cement transformation project (GCTP). Hallett is the largest integrated supplier of building, construction and mining materials ...

more
Issue 06/2024 FI20226072 A1

A sampling tool for sampling reburned lime from a lime kiln, and an apparatus and a method for determining amount of residual carbonate in reburned lime sampled from a lime kiln

(22) 02.12.2022(43) 03.06.2024(57) The invention relates to a sampling tool (10) for sampling reburned lime from a lime kiln, comprising a holding device (11) for holding the sampling tool (10) in the...

more
Issue 06/2024 WORLD CEMENT ASSOCIATION

Alfalah ul Alami Becomes an Associate Corporate Member of WCA

The World Cement Association (WCA) announced it is welcoming Alfalah ul Alami (AuA), a mining and construction materials production company, based in Afghanistan, as an Associate Corporate...

more
Issue 5/2023 CA3192899 (A1)

Process for preparing cold fusion concrete and cement compositions from metal mining and production waste

(22) 13.03.2023(43) 12.05.2023(57) Methods of preparing cold fusion concrete and cement using mining waste are described. (71) Geopolymer Solutions, LLC (US)

more
Issue 4/2023

Circularity is the new black!

Mining and extraction of raw materials is not only the focus of this issue of the ZKG magazine – it also is the beginning of almost all industrial value chains. Since man found out what to do with all...

more
Issue 2/2022 UNIVERSITY OF BAYREUTH

Research project on gypsum mining and biodiversity

A research project of the Disturbance Ecology and Vegetation Dynamics research group at the University of Bayreuth is investigating the importance of gypsum mining sites for biodiversity. The...

more
Issue 1/2022 W&P ZEMENT GMBH

w&p Zement invests in sustainable mining technology

In the spirit of responsible use of natural resources, w&p Zement has invested in a modern raw stone processing plant at the Peggau site. In the future, this will make it possible to process a larger...

more
×