MAPEI

Encapsulation and controlled ­release of Cr(VI) reducing agent: ­application in ready-mix mortars

Raw materials for clinker manufacturing can contain chromium which from the iron ore in the kiln feed, to the mortar bag, remains as a potentially dangerous presence. For more than 60 years, soluble chromates have been recognized as being responsible for allergic contact dermatitis, a typical professional disease that affects construction workers. In 2003, the European Community released the Directive 2003/53/EC that requires that cement and cement-based materials produced or imported in Europe do not release more than 2 mg/kg (part per million – ppm) soluble chromates when mixed with water. As a consequence of this directive, cement produced or imported in Europe is treated with suitable reducing agents that can eliminate soluble chromates.

1 Introduction

The manufacturing process of Portland cement is standardized and widely described in several publications [1]. Raw materials (usually limestone and clays, with some aluminium and iron) are quarried (or obtained from the recovery of waste materials), then properly blended and ground in order to prepare the so-called raw mix. This is used as feeding for the pre-heater tower and rotary kiln, where silica and lime (with alumina/iron oxides used as flux) react in a high temperature process to form the calcium silicates that compose the Portland clinker.

Clinker is then finely ground...

Related articles:

Issue 2016-6 EP 2 077 979 B2

Additives and methods for reducing hexavalent chromium in cement

(22) 26.10.2007 (43) 15.07.2009 (45)12.09.2012/27.04.2016 (73) Mapei S.p.A., 20158 Milano (IT) (57) This invention relates to a method for reducing hexavalent chromium in common cement. This method...

more
Issue 2012-12

The leaching of antimony from concrete

Although already present in Portland cements (basically as a consequence of the use of secondary fuels [1]) antimony recently gained importance due to the fact that it had been identified as one of...

more
Issue 2015-10 WACKER

Highly efficient water repellent for gypsum drymix mortars

Moisture can do irreparable damage to gypsum building materials. To prevent this and to protect the set gypsum mortar against moisture, powder-form water-repellent agents are admixed to the dry-mix...

more
Issue Drymix 2015 WACKER

Highly efficient water repellent for gypsum drymix mortars

Moisture can do irreparable damage to gypsum building materials. To prevent this and to protect the set gypsum mortar against moisture, powder-form water-repellent agents are admixed to the dry-mix...

more
Issue 2018-11 MC-BAUCHEMIE MÜLLER GMBH & CO. KG

MC-Bauchemie officially opens new mortar production in Brazil

On 16.08.2018, MC-Bauchemie Brazil officially opened the new mortar production of MC at Vargem Grande Paulista in São Paulo with more than 130 customers, suppliers, partners and representatives of...

more